Can I use the product even without a foam gun?
Yes, you can use the product with the “Nebula Foam” hand pump. In this case, dilute as follows:
Winter dirt 1:50 (2 caps of the product in 1 litre of water).
Summer dirt 1:100 (1 cap of the product in 1 litre of water).
We recommend that you apply the product always from the bottom up, working on half the car at a time ensuring that the foam is never allowed to dry on the surface.
Can I clean it without a pressure washer?
Yes, although you won’t achieve the same results. You will however, get the emollient action that helps soften the dirt, making it easier to remove later.
Can I apply the product directly onto the dirty surface or do I have to completely wet the car first?
Our advice is to wet the car first to cool the surface, especially in the summer season and to remove dust and coarse dirt, thereby increasing the safety of use.
Once the product has been applied to the surface, can I work with a brush or sponge?
No, because in this stage you are going to detach the coarse dirt from the surface, even strongly anchored dirt. Let the product work and take advantage of its chemical action. After you have rinsed it off, you can then proceed with the thorough washing of the car using a sponge, mitt and brushes for the most difficult areas and features such as emblems or grids.
What are the key steps before proceeding with the prewash of the car?
We always recommend that you start washing from the wheels and tires with “Wheel&Tire Cleaner” and remove any iron contaminants with “Iron Remover”
After the prewash, what can I use for the hand wash with the mitt? For a maintenance wash, use the Neutral Foam Shampoo. For dark or wrapped cars, use “Black&Wrap Shampoo”. Use "Ceramic Shampoo” to add a ceramic action to your wash and thereby achieve greater protection and a water repellent effect.
